Pre Order Expected Mid December | 15mm EPDM Rubber Corner Ramp
- Designed for use with 15mm Rubber Gym Flooring
- Creates a sloped transition at flooring corners
- 147mm x 147mm x 15mm dimensions
- Durable 1.5mm EPDM surface layer
- Recycled SBR rubber base
- Glue-down installation for secure positioning
What is the difference between a corner ramp and an edge ramp?
An edge ramp provides a sloped transition along the exposed straight edge of a rubber flooring installation. A corner ramp is designed to finish the point where two edge ramps meet, creating a continuous transition around the corner of the flooring.
Both components are used to create a neat, finished perimeter around raised gym flooring areas.
Is this corner ramp compatible with 15mm Rubber Gym Flooring?
Yes. The edge ramp is designed for use with 15mm Rubber Gym Flooring, to provide a tapered transition from the surrounding floor level to the full 15mm height of the adjoining tiles.
Are connectors included with the 15mm corner ramp?
No. Unlike our 20mm rubber gym flooring corner ramps, the 15mm corner ramp does not use interlocking connectors. It is designed to be secured in place using a suitable rubber flooring adhesive.
Does the 15mm corner ramp need to be glued down?
Yes. The Command 15mm Corner Ramp requires adhesive installation. Use an adhesive suitable for rubber flooring and the underlying surface, following the adhesive manufacturer's preparation, application and curing instructions.
What is the difference between the 15mm and 20mm corner ramps?
Both ramps provide a tapered transition along exposed rubber flooring edges, but they are designed for different flooring thicknesses and installation methods.
The 15mm corner ramp is designed for 15mm rubber flooring and must be glued down. The 20mm corner ramp is designed for compatible 20mm flooring and uses an interlocking connector system that does not require adhesive.
Are the 15mm corner ramps sold individually?
Yes. Each purchase includes one 500mm corner ramp.
Is the corner ramp suitable for commercial gyms?
Yes. The 15mm EPDM Rubber Gym Flooring Corner Ramp is suitable for everything from home gyms and personal training studios to sporting clubs, schools and commercial strength training facilities. It provides a practical finishing solution for exposed edges of compatible rubber flooring installations.
Can I collect my order from your Melbourne showroom?
Yes. You can collect your order from our Melbourne showroom, or arrange Australia-wide delivery.
Do you offer delivery and installation?
Yes. We deliver Australia-wide, with installation services available throughout Melbourne and selected areas by quotation.
Commercial Rubber Flooring Warranty
3-Year Warranty Against Manufacturing Defects
Permitted Use
- Designed for home, light commercial and commercial gym environments, including strength training areas, functional training spaces and general fitness facilities.
- Suitable for use beneath gym equipment, including weight racks, benches, cable machines and other fitness equipment.
- Suitable for normal strength training activities, including controlled weight drops onto appropriate flooring installations.
- Flooring must be installed on a suitable, stable, level and properly prepared surface, with adequate support and drainage where required.
- Clean regularly using a vacuum, damp mop or pH-neutral cleaning solution suitable for rubber flooring.
- Normal compression, surface marking and gradual wear may occur from gym equipment, foot traffic and weight training activities.
- Damage resulting from normal, intended use is not automatically excluded from warranty coverage.
Do Not
- Install on unstable, uneven, contaminated or unsuitable surfaces, or where excessive moisture may accumulate.
- Drag heavy equipment, sharp objects or abrasive materials across the flooring.
- Expose flooring to excessive concentrated impacts or loads beyond its intended application.
- Use sharp or pointed equipment, footwear or objects that may puncture, cut or tear the rubber surface.
- Use harsh chemicals, solvents, petroleum-based products, bleach or unsuitable cleaning agents.
- Expose flooring to excessive heat, open flames or prolonged direct sunlight.
- Allow standing water, excessive moisture or chemical contamination to remain on or beneath the flooring.
- Bend, fold, cut or modify flooring in a manner that compromises its structural integrity.
Warranty Exclusions
- Normal wear and tear, including surface abrasion, scuffing, scratches, polishing and gradual surface deterioration.
- Cosmetic variations in colour, shade, texture, rubber granule distribution or finish, including differences between manufacturing batches.
- Surface discolouration, fading or deterioration caused by UV exposure, excessive heat or unsuitable environmental conditions.
- Compression marks, indentations or permanent deformation caused by prolonged or excessive concentrated equipment loads.
- Cuts, tears, punctures, gouges, burns or other physical damage caused by equipment, sharp objects, dragging, excessive impacts or misuse.
- Damage to exposed or unsupported edges, including chipping, tearing or deterioration caused by equipment movement or repeated impact.
- Damage caused by incorrect installation, unsuitable subfloors, inadequate support, improper adhesives or insufficient drainage.
- Flooring movement, gaps, lifting or separation caused by installation conditions, subfloor movement or temperature-related expansion and contraction.
- Damage caused by standing water, excessive moisture, chemical exposure, unsuitable cleaning products or improper maintenance.
- Damage resulting from outdoor exposure or use in environments unsuitable for the flooring.
- Damage caused by modifications, alterations or use outside the flooring's intended application.
- Gradual deterioration associated with normal use, as distinct from premature deterioration caused by defective materials or workmanship.
Manufacturing defects, including premature structural cracking, splitting, crumbling or separation of the EPDM surface layer from the rubber base, are covered where determined to result from defective materials or workmanship rather than normal wear, impact damage, installation conditions or misuse.
Little Bloke Fitness has been supplying gym equipment to Australia since 2009. Over that time we've helped thousands of Australians build home gyms, fit out commercial facilities and create training spaces that get used day after day.
1RM and 360 Strength are our own equipment brands, covering everything from power racks and rigs to weight benches, barbells, bumper plates, dumbbells, kettlebells and strength machines. We design the products in-house, manufacture them to our specifications and support them here in Australia. From product design and engineering through to after-sales support, we're involved in every stage of the process. That means we understand exactly how our equipment is built, how it's intended to be used, and how to support it long after the sale.
With a Melbourne showroom, local warehouse and a team that understands strength training equipment, we're here to help you choose the right product for your needs, not just make a sale.
We ship our equipment Australia-wide from our Melbourne warehouse and a network of trusted suppliers. Shipping costs can be calculated above.
If your order arrives damaged, incorrect or incomplete, please contact us as soon as possible and our team will work with you to resolve it.
Change-of-mind returns may be accepted on unused products in their original condition, however conditions and exclusions apply. Please refer to our Shipping Information and Returns Policy pages for full details.
4 interest-free payments of
$ 5.00 AUD
with
i
Other finance is available on many of our products for approved applicants. We work with a range of finance providers and can assist with both personal and business finance solutions.
Approval criteria, fees, charges and terms vary between lenders. For more information or to discuss your options, please visit our Finance Information page or contact our team.