Wall Mounted Chin Up Bars
17 products
Up To 50% Off Selected Products Until Nov 30
Up To 50% Off Selected Products Until Nov 30
Visit our Reservoir showroom today!
Visit our Reservoir Showroom to experience our products firsthand before you buy.
17 products
Wall-mounted chin-up bars give you a dedicated pull-up and chin-up station without needing a full rig or rack. They mount directly to a suitable structural wall, giving you a compact bodyweight training station without taking up floor space.
Our range covers single chin-up bars, fat grip chin-up bars, multi-grip chin-up bars, twin-bar setups and triple-bar configurations. Standard bars and long bars are available, along with extension kits for adding bars to an existing wall-mounted setup. All chin-up bars in the range are from the 1RM range.
Since 2009, Little Bloke Fitness has supplied Australian home gym owners, PT studios and commercial facilities with wall-mounted training equipment built for long-term use. Our range is available to view in our Melbourne showroom and ships Australia wide.
Need help choosing the right chin-up bar? Call 03 9462 3943, email info@littleblokefitness.com.au, or visit our Melbourne showroom for personalised advice.
Browse our wall mounted chin up bars below
Pull-ups and chin-ups are fundamental bodyweight exercises for developing back, lat, shoulder and arm strength. A dedicated wall-mounted bar gives you a solid, permanent station for these movements without requiring the floor space of a full rig or rack.
Our range includes standard single bars, fat grip bars that increase the grip demand, multi-grip bars with angled and neutral grip positions, and multi-bar configurations that combine different bar types on a single wall mount. Extension kits are available for adding bars to an existing wall-mounted setup, allowing you to expand over time.
Pull-ups, chin-ups, hanging leg raises and bodyweight pulling movements
Home gyms and garages where a full rig is not needed or not practical
Adding a dedicated chin-up station alongside an existing rack or rig
Increasing grip demand with fat grip bar options
Multi-grip training with bars that offer neutral, wide and angled hand positions
Our chin-up bar range covers single bars through to multi-bar configurations:
Standard single chin-up bars in regular and long lengths
Fat grip chin-up bars with a larger diameter grip
Multi-grip chin-up bars with multiple hand position options
Twin-bar configurations combining different bar types
Triple-bar configurations for multiple users or grip variety
Extension kits for expanding an existing wall-mounted setup
Heavy-gauge steel construction
Requires fixing to a suitable load-bearing surface
Expand your chin-up training with:
Rig Accessories - band pegs, dip bars and other bolt-on accessories
Weight Plates - plates for weighted chin-ups using a dip belt
Lifting Accessories - dip belts, chalk and grips for your chin-up training
Wall Mounted Rigs - expand to a full wall-mounted rig system
Gym Flooring - rubber tiles and mats for a safe landing surface
Whether you need a single pull-up bar for a home gym or a multi-bar station for a commercial facility, we can help. Call 03 9462 3943, email info@littleblokefitness.com.au, or visit our Melbourne showroom for expert advice.
A standard chin-up bar has a regular diameter grip at 32mm. A fat grip bar has a larger 50mm diameter, which increases the grip demand during pull-ups, chin-ups and hanging exercises. Fat grip bars make exercises harder by requiring more grip effort.
A multi-grip chin-up bar provides several hand-position options within the same bar, allowing you to switch between different grip widths and orientations for pull-ups, chin-ups and hanging exercises. This gives you more exercise variety without needing separate chin-up stations.
Yes. Extension kits are available that allow you to add additional single, fat or multi-grip bars to an existing wall-mounted setup. This allows you to expand from a single-bar station to a twin or triple-bar configuration over time.
Wall-mounted chin-up bars need to be fixed to a suitable load-bearing surface, such as timber framing, masonry or concrete. The fixings required will depend on the product and the surface you are mounting it to.
If you're unsure whether your wall is suitable or which fixings to use, we recommend speaking with a builder or suitably qualified professional before installation.
You need enough wall height to mount the chin-up bar at a suitable training height, plus enough clearance above the bar for the exercises you plan to perform. Pull-ups and chin-ups require head clearance above the bar, while muscle-ups and other overhead movements need additional space.
Check the dimensions of the bar you're considering and your available wall and ceiling height before installation, or contact our team and we can help you choose a suitable setup.
Yes, but our wall-mounted chin-up bars are designed primarily for indoor use. The steel is powder coated, but it is not galvanised and the coating is not an exterior-grade finish.
If installed outdoors, exposure to rain, moisture, salt air and UV will gradually degrade the coating and may eventually lead to surface corrosion. For this reason, outdoor installation is possible but is not covered by warranty against coating deterioration, rust or corrosion.
If you do install the bar outside, placing it under cover and away from direct weather exposure will help extend the life of the finish.